The clips affixed, adhesive or folded building expansion joint covers are designed to protect and conceal the facade, wall, floor and ceiling expansion joints. Aesthetic, decorative and economic they are fast and easy to install. To cover your needs, we offer expansion joint covers for facade, expansion joint covers for wall, expansion joint covers for floor and expansion joint covers for ceilings for gaps from 10 to 500 mm. There are several cover joints according to the application : no traffic, light or medium traffic use adhesive or clips affixed joint covers; for intense traffic, use drilled and countersunk extruded joint covers. Aesthetic finishes are also available.
Flexible sealing profiles are designed to quickly, economically and aesthetically seal vertical and horizontal expansion joints, both external and internal. These profiles are the ideal solution for discreetly covering walls, facades and ceilings. For a perfect finish, the flexible profiles can be glued or embedded. They are compatible with all our firewall systems.
Aluminium expansion joint covers are aesthetic, decorative and economical.
Quick and easy to install, with no need for drilling or gluing, they come in a range of clip models (S, SLL, XL or XXL) suitable for all joint openings from 20 to 110 mm.
Our clip-affixed brass joint covers provide an aesthetical and decorative solution. Our joint covers are available in different clip sizes for particular joint gaps, from 10 mm to 60 mm. These products are available from stock in 3m lengths, in flat section of 90 mm only.
The Clip affixed brass joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 60-mm wide in walls, ceilings and floors (pedestrian use).
Our clip-on building expansion gaps covers in PVC can be used either indoors or outdoors wall expansion joints, ceilings and floors (light use). The expansion joint covers made for the floor are intended for a light use.
CJE-PF counterstunk joint cover is designed to protect and cover floor joints, but can also be used for facades, walls and ceilings. Aesthetic, decorative and economical, it can be used indoors or outdoors. Pre-drilled and countersunk, it is easy to install, and are used in new buildings and renovation projects for joints with openings from 10 to 250 mm.
The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections.
Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar.
This drilled and bent vertical expansion joint cover is the most economical solution for covering expansion joints. Available from stock, this raw aluminum expansion joint cover can be delivered quickly to your worksite.
Aluminium expansion joint covers are aesthetic, decorative and economical.
Quick and easy to install, with no need for drilling or gluing, they come in a range of clip models (S, SLL, XL or XXL) suitable for all joint openings from 20 to 110 mm.
Our clip-affixed brass joint covers provide an aesthetical and decorative solution. Our joint covers are available in different clip sizes for particular joint gaps, from 10 mm to 60 mm. These products are available from stock in 3m lengths, in flat section of 90 mm only.
The Clip affixed brass joint covers are used in new constructions and in refurbishment projects, indoors or outdoors, in joints from 10-mm to 60-mm wide in walls, ceilings and floors (pedestrian use).
Our clip-on building expansion gaps covers in PVC can be used either indoors or outdoors wall expansion joints, ceilings and floors (light use). The expansion joint covers made for the floor are intended for a light use.
Floor expansion joint for carparks and any other place with or without traffic of slow vehicles. Different widths available, for gaps from 100 to 600mm. Extra-thick steel plate reinforcement to withstand intensive vehicular traffic and rubber finish for shock-noise reduction due to vehicle traffic.
CJE-PF counterstunk joint cover is designed to protect and cover floor joints, but can also be used for facades, walls and ceilings. Aesthetic, decorative and economical, it can be used indoors or outdoors. Pre-drilled and countersunk, it is easy to install, and are used in new buildings and renovation projects for joints with openings from 10 to 250 mm.
The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections.
Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar.
This drilled and bent vertical expansion joint cover is the most economical solution for covering expansion joints. Available from stock, this raw aluminum expansion joint cover can be delivered quickly to your worksite.
Flexible expansion joints in thermoplastic vulcanizate or EPDM to be installed on floor, sealed with a special glue.
Internal cell’s design allows up to 50% multidirectional movements while maintaining sufficient lift to absorb the traffic.
Hydrocarbon and UV resistant profiles, to be installed at least 5mm below the floor level.
Compression profile for joint gaps from 10 to 120 mm. Embedded or glue-down installation. Standard colours: black, grey, beige. It can also be supplied in all possible RAL colours.
Embedded flexible seals (they can be glued) for fast and cost-effective installation in vertical and horizontal joints, either indoors or outdoors. PSR seals have a cap-shaped top section that ensures a full covering of the joint, masking any possible irregularities in the joint.
For large areas, expansion joints are essential to relieve pressure and reduce cracking or damage caused over time by movement or shrinkage.
These joints act as a free space in the floor, wall and ceiling, which can move freely to absorb movement and prevent the material from cracking.
Expansion joints are essential for floors, walls, ceilings and roofs in parking lots, shopping centers, hospitals, etc. These solutions improve the longevity of structures by reducing damage caused by structural settlement, movement generated by the external environment and earthquakes.
Expansion joints are closed with an expansion joint cover plate. Seismic joint covers must be suitable for the joint opening, expected movement, application (floor, wall, ceiling) and expected floor traffic.
Building expansion joint covers are therefore essential in large structures.
What Types Of Expansion Joint Covers Are Available?
There are many types of expansion joint cover plate on the market, and each has a specific function and style. To make sure you get the right joint cover, don’t hesitate to contact us.
We offer building expansion joint covers attached with clips, glue both flat and angled to meet all needs. So you can find the option you need in our wide range.
Our seismic joint covers are available in a range of colors and materials, so there is one for every project. Because the joint covers are visible, they must be both aesthetically pleasing and functional.
Choosing The Right Seismic Joint Covers
Building expansion joint covers are designed to protect and conceal the facade, wall, floor and ceiling expansion joints. Aesthetic, decorative and economical, they are easy to install.
To meet the needs of our clients, we offer expansion joint covers for facades, expansion joint covers for walls, expansion joint covers for floors and expansion joint covers for ceilings, all of which can fill gaps from 10 to 500mm.
There are several cover joints according to the application:
For areas without traffic or with light pedestrian traffic and little expansion movement, we recommend clip-on or glue-on covers;
For areas with light vehicle traffic and significant movement, we recommend our CJE-PF extruded, drilled and milled joint covers.
Aesthetic finishes for seismic joint covers are also available so that you can find the perfect one that is both functional and pleasing to the eye.
We use cookies to give you the best experience on our website. By clicking on “Accept all cookies”, you consent to the use of ALL cookies. However, you can visit Cookie settings to provide controlled consent.
This website uses cookies so that we can provide you with the best possible user experience. Cookie information is stored in your browser and performs functions such as recognizing you when you return to our website and helping our team understand which sections of the website you find most interesting and useful.
The necessary cookies are absolutely essential for the proper functioning of the website. These cookies provide the basic functionalities and security functions of the website, in an anonymous form.
Cookie
Duration
Description
cookielawinfo-checkbox-analytics
11 months
This cookie is set by the GDPR Cookie Consent plugin. The cookie is used to store the user's consent for cookies in the "Analytics" category.
cookielawinfo-checkbox-necessary
11 months
This cookie is set by the GDPR Cookie Consent plugin. Cookies are used to store user consent for cookies in the "Necessary" category.
viewed_cookie_policy
11 months
The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not the user has consented to the use of cookies. It does not store any personal data.
Analytical cookies are used to understand how visitors interact with the website. These cookies help provide information on the number of visitors, bounce rate, source of traffic, etc.
Cookie
Duration
Description
__utma
2 years
Used to distinguish users and sessions. The cookie is updated each time data is sent to Google Analytics.
