Facade, wall and ceiling expansion joints

Seismic vertical expansion joint in anodized aluminum, with pre-drilled side plates and a central plate to absorb large movements. Ideal for use on walls, facades and ceilings. Available in 3lm.

Seismic vertical expansion joint in anodized aluminum for facades, walls and ceilings. Composed of a single support and an aluminum cover plate, this expansion jointing system absorbs expansion, contraction and shear movements.

The JDV 4.04 expansion joint is suitable for façades, walls and ceilings. It consists of two pre-drilled thermoplastic polymer or galvanized steel side plates and a flexible, interchangeable nitrile insert to absorb small multidirectional movements.

The ceiling, wall and facade expansion joint is made up of two raw aluminum side plates and a flexible nitrile insert. The side plates are covered with cellular foam to compensate for surface irregularities. This system is part of our wide range of expansion jointing solutions designed to absorb structural movements.

Seismic vertical expansion joint for facades, walls and ceilings. Suitable for joint openings from 50 mm to 600mm. Our JDV 4.07 can absorb large multidirectional movements of up to 50%. It is supplied in 3 linear meter lengths and composed of two side plates and a TPV or epdm expansion joint insert.

Vertical expansion joint profile especially designed to absorb thermal movement in buildings with external insulation.
This profile is composed of : A fiber meshstrip for a better adhesion, a nitrile sealing layer for waterproofing and UV resistant PVC profiles trim.

All metal vertical seismic expansion joint for train stations, airports, shopping centre... This range is design with springs to allow seismic movements.

Vertical aluminium expansion joint for walls and ceilings. Aesthetic solution for any kind of building: train stations, airports, malls... Specially designed for drywalls, plasterboards… finishes.

Seismic vertical expansion joint in anodized aluminum, with pre-drilled side plates and a central plate to absorb large movements. Ideal for use on walls, facades and ceilings. Available in 3lm.

Seismic vertical expansion joint in anodized aluminum for facades, walls and ceilings. Composed of a single support and an aluminum cover plate, this expansion jointing system absorbs expansion, contraction and shear movements.

The ceiling, wall and facade expansion joint is made up of two raw aluminum side plates and a flexible nitrile insert. The side plates are covered with cellular foam to compensate for surface irregularities. This system is part of our wide range of expansion jointing solutions designed to absorb structural movements.

Seismic vertical expansion joint for facades, walls and ceilings. Suitable for joint openings from 50 mm to 600mm. Our JDV 4.07 can absorb large multidirectional movements of up to 50%. It is supplied in 3 linear meter lengths and composed of two side plates and a TPV or epdm expansion joint insert.

All metal seismic expansion joint for ceilings.
Flat and angle models are available.

Expansion joint for false ceilings, comprising aluminium side sections and an interchangeable insert in the centre, able to take up large multidirectional movements. Specially suitable for suspended ceilings. For joints in false ceilings or suspended ceilings with a gap up to 100 mm.

Seismic expansion joint for suspended ceilings with 50% movement. Composed of two aluminum side plates and a flexible TPV insert. A self-centering pivot is available for openings of 150 mm and above, to ensure a better hold. Hooks are not supplied with the ceiling expansion joint.

Vertical aluminium expansion joint for walls and ceilings. Aesthetic solution for any kind of building: train stations, airports, malls... Specially designed for drywalls, plasterboards… finishes.

Seismic vertical expansion joint in anodized aluminum, with pre-drilled side plates and a central plate to absorb large movements. Ideal for use on walls, facades and ceilings. Available in 3lm.

Seismic vertical expansion joint in anodized aluminum for facades, walls and ceilings. Composed of a single support and an aluminum cover plate, this expansion jointing system absorbs expansion, contraction and shear movements.

The JDV 4.04 expansion joint is suitable for façades, walls and ceilings. It consists of two pre-drilled thermoplastic polymer or galvanized steel side plates and a flexible, interchangeable nitrile insert to absorb small multidirectional movements.

The ceiling, wall and facade expansion joint is made up of two raw aluminum side plates and a flexible nitrile insert. The side plates are covered with cellular foam to compensate for surface irregularities. This system is part of our wide range of expansion jointing solutions designed to absorb structural movements.

Seismic vertical expansion joint for facades, walls and ceilings. Suitable for joint openings from 50 mm to 600mm. Our JDV 4.07 can absorb large multidirectional movements of up to 50%. It is supplied in 3 linear meter lengths and composed of two side plates and a TPV or epdm expansion joint insert.

Vertical expansion joint profile especially designed to absorb thermal movement in buildings with external insulation.
This profile is composed of : A fiber meshstrip for a better adhesion, a nitrile sealing layer for waterproofing and UV resistant PVC profiles trim.

All metal vertical seismic expansion joint for train stations, airports, shopping centre... This range is design with springs to allow seismic movements.

All metal seismic expansion joint for ceilings.
Flat and angle models are available.

Expansion joint for false ceilings, comprising aluminium side sections and an interchangeable insert in the centre, able to take up large multidirectional movements. Specially suitable for suspended ceilings. For joints in false ceilings or suspended ceilings with a gap up to 100 mm.

Seismic expansion joint for suspended ceilings with 50% movement. Composed of two aluminum side plates and a flexible TPV insert. A self-centering pivot is available for openings of 150 mm and above, to ensure a better hold. Hooks are not supplied with the ceiling expansion joint.

Vertical aluminium expansion joint for walls and ceilings. Aesthetic solution for any kind of building: train stations, airports, malls... Specially designed for drywalls, plasterboards… finishes.