JDH 6.32 All-stainless steel floor expansion joint
JDH 6.32
All-stainless steel floor expansion joint JDH 6.32
Product compatible with our fire protection solutions and our waterproofing membranes
Load
Environment
Movement
stainless steel
natural
flat and angle
CHARACTERISTICS :
Suitable for all types of finish: concrete, screed, tiling, marble, etc.
For indoor and outdoor floor joints with a gap up to 35 mm. Suitable for pedestrian traffic.
Section length of 2,99 lm. Stainless steel side angle sections.
Floor-to-floor type only.
| REFERENCES JDH 6.32 | 6.32-020 | 6.32-030 | 6.32-040 | 6.32-050 | 6.32-060 |
|---|---|---|---|---|---|
| GAP UP TO (MM) W | 20 | 30 | 40 | 50 | 60 |
| MOVEMENTS (MM) | -5 / +5 | +8 / -8 | +10 / -10 | +13 / -13 | +15 / -15 |
| VISIBLE WIDTH (MM) S | 30 | 37 | 45 | 55 | 68 |
| TOTAL WIDTH (MM) B | 128 | 133 | 143 | 165 | 205 |
| HEIGHT (MM) H | 30 à 100 | 30 à 100 | 35 à 100 | 40 à 100 | 50 à 100 |
| LOAD-BEARING CAPACITIES | | | | | |
The load capacity is always given for a joint in its initial position. In case of opening movements, the load capacity is strongly reduced and the product will only be suitable for light pedestrian traffic. The indicated load values are based on vehicles with pneumatic wheels with a contact area of 200x200 mm.