JF 600 Control joint

The JF 600 range of control joints has been designed to prevent problems, such as cracking and tile lifting, that will always appear when the floor covering is laid on large surfaces without any joints. The joints of the JF 600 range are used as control joints with adhesive-laid floor covering such as tiles, ceramics, etc. of 15 mm thickness or less. They are suitable for commercial and industrial uses. In general, control joints are used to enclose areas between 25 m2 and 60 m2, with a maximum linear dimension between 5 m and 10 m. Made with coextruded PVC with an outer layer of rigid PVC for efficient protection of the tile edges, and a flexible PVC central element able the take up the floor constraints. The joints of the JF 600 range are used essentially for "budget" applications or when aesthetics is not a determining factor. Available in different heights and a length of 2.5 m. The control joints of the JF 600 range are available with long flanges or short flanges, in the standard grey, black and white colours. They can also be made with other heights, in any other RAL colour, and in any other special colour depending on quantity. The joints of the JF 600 range are used as control joints with adhesive-laid floor covering such as tiles, ceramics, etc. of 15 mm thickness or less. They are suitable for commercial and industrial uses. In general, bay joints are used to enclose areas between 25 m2 and 60 m2, with a maximum linear dimension between 5 m and 10 m.