Please tick your settings to determine the appropriate solutions.
ANTISLIP ADHESIVE TAPES
Anti-slip floor marking for all smooth or rough surfaces, in all types of environment, even if humid. Industrial and residential use, indoors et outdoors. General and safety marking in industrial, public and private buildings. Suitable for any type of base material: rough floors, painted floors, tiling, marble, stone, timber, aluminium, metal stairs, access ramps. General and safety marking for buildings. Adhesive material to be stuck directly on the surface, which can previously be cleaned and treated with a bonding primer or an adhesive. For rough surfaces, aluminium plates are available to be fastened onto the surface. Rolls of different widths: 25 mm, 50 mm, 100 mm, 150 mm, other widths available between 9 mm and 1,000 mm. Standard rolls of 18.30 m. Roll of carborundum in standard colours: black, grey, white, yellow, clear, blue, green, red, brown or bright colours (fluorescent yellow...). Rolls or stripes in single or two colours black/yellow, red/white, etc. All Pantone and RAL colours or special colours according to quantities. General and safety marking for buildings. Adhesive material to be stuck directly on the surface, which can previously be cleaned and treated with a bonding primer or an adhesive. For rough surfaces, aluminium plates are available to be fastened onto the surface. Anti-slip floor marking for all smooth or rough surfaces, in all types of environment, even if humid. Industrial and residential use, indoors et outdoors. General and safety marking in industrial, public and private buildings.
Learn moreNDM VD
All-aluminium step edge strip, NDM VD1 (40x20x3 mm) and NDM VD2 (55x33x3 mm). Finishing strip for concrete steps or directly on floor covering. Ribbed anti-slip surface. Suitable for any type of construction. Step edges, on concrete or directly on finished floor covering. Strips held by fasteners every 30 cm, or ideally by chemical bonding using Vedpoxy resin. Aluminium strip length of 3 m. Not drilled. Natural aluminium and anodised aluminium. Option of powder coating in RAL colour. Option of hot-melt adhesive stripes for fixing to floor. Step edges, on concrete or directly on finished floor covering. Strips held by fasteners every 30 cm, or ideally by chemical bonding using Vedpoxy resin. Step edges, on concrete or directly on finished floor covering. Strips held by fasteners every 30 cm, or ideally by chemical bonding using Vedpoxy resin.
Learn moreBACKER RODS
In accordance with relevant standards (French SNJF and ISO), the joint backing is a material that is laid to limit the depth of the sealant in the joint and to define the back profile of the joint. It stops the sealant from adhering to the three faces of the joint and helps to resist the pressures that occur when apply the sealant. The joint backing must not have any effects that will change the physical and chemical properties, and even the appearance, of the sealant. It can eventually serve as a barrier to separate the sealant for chemical attacks from the bottom side of the joint. The joint backing is used as a permanent formwork when applying a sealant or any other finish. It is used to limit the depth of sealant that is applied. It is recommended for use with the following sealants: silicone, polyurethane, polysulphide, acrylic. Grey closed-cell polyethylene foam. Available in diameters from 10 mm to 50 mm, supplied in coils or in length according the the diameter used. Grey foam supplied in coils or lengths. The joint backing is used as a permanent formwork when applying a sealant or any other finish. It is used to limit the depth of sealant that is applied. It is recommended for use with the following sealants: silicone, polyurethane, polysulphide, acrylic.
Learn moreCJE-PF
CJE-PF counterstunk joint cover is designed to protect and cover floor joints, but can also be used for facades, walls and ceilings. Aesthetic, decorative and economical, it can be used indoors or outdoors. Pre-drilled and countersunk, it is easy to install, and are used in new buildings and renovation projects for joints with openings from 10 to 250 mm.
Learn moreCJP
The CJP range of folded joint covers is designed to protect and cover joints in façades, walls, ceilings and floors. Economical, easy and quick to install, pre-drilled or plain, they are used in new constructions and in refurbishment projects, in expansion joints up to 500-mm wide, using flat or angle sections. Generally installed by mechanical means, they are drilled and countersunk in one side every 400 mm, i.e. 7 holes per 3-m bar.
Learn moreCJV
This drilled and bent vertical expansion joint cover is the most economical solution for covering expansion joints. Available from stock, this raw aluminum expansion joint cover can be delivered quickly to your worksite.
Learn moreROPES VEDAFEU C©
VEDAFEU C© fire cord is suitable for horizontal and vertical joints, as well as head-of-wall applications. Tested with VEDACOLLE© adhesive and linking material by official laboratories, our fire retardant rope allows movements of +20% and -85%, and is EI 240-rated (240-minute fire-tightness and thermal insulation), for all joint openings from 10 to 120 mm.
Learn moreBLANKETS VEDAFEU M©
Why use our firestop blanket for a building ?
For initial joint widths from 100 to 420mm, with or without joint cover.
Officially rated EI 120 minutes without failure.
Tests were performed with a +40% movement.
BLANKETS VEDAFEU N©
Our VEDAFEU N fire stop joint range, including fire stop joint covers and fire blankets, conforms to several certifications in respect of horizontal and vertical joints. These fire stop joint covers are specially designed to ensure the fire integrity and gas-tightness of expansion joints with large gaps and/or large movements.
Learn moreBLANKETS VEDAFEU N20©
VEDAFEU N20© firestop blanket are rated EI 240 (fire-tight and thermally insulated for up to 240 minutes without failure) for all joint openings from 60 to 300 mm. Mechanical tests at 50% have been successfully carried out in the laboratory.
Learn more