Floor expansion joints with flexible insert
Floor expansion joints with one or more flexible inserts are used to absorb structural movements. Numerous models of floor expansion joint covers, to be installed directly on the finished floor or to be embedded with the floor finish, are available: floor joint covers for tiles and stones, expansion joints for carparks, waterproof expansion joints, reinforced expansion joints. Our technical solutions are suitable for all types of finishes: expansion joints for slabs, expansion joints for concrete, expansion joints for tiles and many other finishes.
Embedded systems with flexible inserts are designed to withstand standard light traffic and, in some cases, heavy traffic. They can be used both indoors and outdoors, in new construction or renovation, with any type of finish: screed, concrete screed, tiles, stone… The floor expansion joints with flexible insert can be associated with our VEDAFEU firestop joints.
JDH 5.02
Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
JDH 5.02 with caps
Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
JDH 5.04
Floor expansion joint for indoor and outdoor applications, comprising pre-drilled aluminium side angle sections and an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
JDH 5.06
Seismic floor expansion joint, comprising aluminium side angle sections connected by an interchangeable flexible insert in the centre with plain surface, available in black or grey (other colours on request), able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, etc.
JDH 5.08
Floor expansion joint for indoor and outdoor applications, comprising two aluminium side angle sections and one or two interchangeable flexible nitrile inserts available in black or grey, able to take up expansion and contraction movements.
JDH 5.10
Floor expansion joint for indoor and outdoor applications, comprising an interchangeable flexible insert in the centre, able to take up expansion and contraction movements. Suitable for all types of finish: concrete, screed, tiling, marble, etc.
JDH 5.12
Floor expansion joint, comprising aluminium side angle sections connected by flexible inserts available in black or grey, able to take up expansion and contraction movements. Suitable for expansion joints with gaps up to 100 mm and for all types of finish: concrete, screed, tiling, etc.
JDH 5.18
Seismic floor expansion joint, extra large, comprising two identical sections, generally from the JDH 5.02 or JDH 5.04 (see data sheets), connected by an aluminium supporting structure. The inserts are available in black or gray and in different widths (50 mm, 65 mm), able to take up relatively significant tridimensional movements. The extra large joint is suitable for gaps up to 600 mm and for all types of finish: slabs, screed, tiling, stone, marble, carpet, etc.
JDH 5.20
Seismic floor expansion joint, extra large, comprising aluminium side angle sections and an aluminium central plate, connected by two flexible inserts, available in black, able to take up expansion and contraction movements. Suitable for expansion joints with gaps up to 400 mm and for all types of finishes: screed, natural stone, cast stone...
JDH 5.25
Watertight floor expansion joint specially recommended for carparks. Stainless steel or aluminium protection, very good protection, very good resistance to intensive light vehicles traffic. Very resistant to chemicals and petrol.
JDH 5.26
Surface mounted floor expansion joint profile for interior or exterior. Made of drilled and coutersunk reinforced aluminium side plates associated with a hot weldable flexible insert.
Specially adapted for installation on finished floor.
JDH 5.26 R+3
Surface mounted floor expansion joint profile for interior or exterior. Made of drilled and coutersunk reinforced aluminium side plates associated with a hot weldable flexible insert.
Specially adapted for resilient flooring or resin finishes.
JDH 5.30
Floor expansion joint for interior carparks levels and any other applications without traffic or with traffic of low speed vehicles. Made of flexible insert able to take up expansion and contraction movements. The JDH 5.30 expansion joint is held by two galvanised steel, aluminium or stainless steel side plates in different thicknesses.
JDH 5.305
Made of flexible insert, able to take up expansion and contraction movements and two galvanised steel, mill finish aluminium or stainless steel strips. For indoor floor joints with a gap between 20 mm and 35 mm. Suitable for medium heavy traffic upt o 90 kN and intense traffic of light vehicles.
JDH 5.31
Floor expansion joint for interior carparks, access ramps, and any other applications without traffic or with traffic of low speed vehicles. The JDH 5.305 surface mounted profile is made of flexible section and two galvanised steel, aluminium or stainless steel side plates. Perfectly suited for finished floor.
JDH 5.32
Floor expansion joint for interior car parks levels, access ramps, and any other place with or without traffic of slow vehicles. Made of flexible insert and mill finish aluminium or galvanized steel or stainless steel side plates, special finished floor.
JDH 5.34
Mechanical floor expansion joint made of aluminium side plates and flexible insert for all types of finishes : screed, natural stone, cast stone, etc.
Floors are subject to expansion and contraction movements over time due to shrinkage of concrete, settlement of structures, environmental movements, earthquakes, etc. To reduce the impact of structural movement on the building, construction companies use expansion joints to absorb movement and reduce cracking and damage.
For large flooring projects, the right mechanical expansion joints, such as those with flexible inserts, should be selected to provide additional movement and protection.
Floor expansion joints with one or more flexible inserts are used to absorb structural movements. Our range of floor expansion joint systems with flexible inserts is designed to provide quality and versatility. We have products that can be used for interior or exterior projects, meaning that you can find the right solution in our extensive selection.
The Types Of Floor Expansion Joint Systems We Offer
Our technical solutions are suitable for all types of finishes. We offer expansion joints for slabs, expansion joints for concrete, expansion joints for tiles and many other finishes. Numerous models of floor expansion joint covers, to be installed directly on the finished floor or to be embedded with the floor finish, are available. These include floor joint covers for tiles and stones, expansion joints for car parks, waterproof expansion joints, and reinforced expansion joints.
Embedded floor expansion joint systems with flexible inserts are designed to withstand standard light traffic and, in some cases, heavy traffic from both footfall and vehicles.
They can be used both indoors and outdoors, in new construction or renovation, with any finish, including screed, concrete screed, tiles, stone and more.
The floor expansion joints with flexible inserts in our range can be associated with our VEDAFEU firestop joints and are the perfect accompaniment to this product.
Why Use Floor Expansion Joints With Flexible Inserts
There are many types of floor expansion joints, so choosing the right ones for your next project can be a challenge for construction project managers.
A floor expansion joint with flexible inserts can be use for car park construction projects, as these joints are flexible and can withstand light vehicle traffic.
Also, a mechanical expansion joint with a flexible insert can be waterproof with our VED’EPDM membrane.
Whether you need a mechanical expansion joint or another type of floor expansion joint, Veda France has the best option for you. Browse our selection of floor expansion joint systems to find the right solutions for your upcoming projects, such as JDH 5.02, JDH 5.02 with caps, JDH 5.04, JDH 5.06, JDH 5.08, JDH 5.10, JDH 5.12, JDH 5.18, JDH 5.20, JDH 5.25, JDH 5.26, JDH 5.26 R+3, JDH 5.30, JDH 5.305, JDH 5.31, JDH 5.32, JDH 5.34. Our wide selection of expansion joints may interest you as well.